SNAP-ON RIBBON CONNECTORS
The LED ‘snap-on’ ribbon connectors power cable makes a simple & secure way to add an extra power cable to a cut length of LED ribbon. The ‘snap-on’ inter-connecting cable with 140mm of cable allows for cornering or just spacing lengths of ribbon apart. To join two lengths of LED strip lights together seamlessly use the ‘snap-on’ coupling joint.
Available for static and RGB LED ribbon.
RGB WIRELESS WALL PLATE CONTROLLER
This controller remotely controls RGB LED Strip by Radio Frequency or by wire using DMX512 signal. Wireless or DMX control receivers are required, they are controlled together and remain perfectly synchronised with each other. The W button is for use with RGBW LED ribbon.
Same size as a standard UK wall switch. Compatible with standard 35mm deep plastic back boxes, back box is not included. Metal back boxes shield the wireless signal so are not suitable.
RGB REMOTE WIRELESS MULTI-ZONE CONTROLLER
This high performance RGB RF wireless LED touch remote controller with a 30m range can control many metres of RGB LED ribbon in up to 8 zones using power repeaters.
Simple to use and once the zones have been created it offers 18 modes including dimming & speed.
RGB+W WALL PLATE CONTROLLER
This RGB+W LED colour controller has a touch sensitive colour wheel for easy light colour selection.
This colour controller has dimming and fading options. A static white can also be selected on the colour wheel.
12-24V RGBW LED strip and a low voltage transformer wire directly into the back of this controller.
Same size as a standard UK wall switch. Compatible with standard 35mm deep plastic back boxes, back box is not included.
RGB+W WIRELESS WALL PLATE CONTROLLER
This high performance RGB+W wireless LED touch panel controller with a 30m range can control many metres of RGB+W LED ribbon in synchronised format using wireless receivers.
RGB+W WIRELESS MULTI-ZONE WALL PLATE CONTROLLER
This powerful RGB+W wireless wall plate controller with easy to use touch colour wheel can control in a synchronised or 4 zone format.
The wall plate outputs a RF signal to wireless zone receivers. Features include an on/of button, touch sensitive colour wheel, colour scroll, jump and fade modes, dimming and speed adjustment.
2,4 & 5 CORE FLEX
Our 5m rolls of LED ribbon strip are supplied with a short integral power cable at each end. Cut lengths are supplied with a power cable of approximately 150mm. If you need to extend a run, we now hold stock of 2, 4 & 5 core flex.
Two core flex for static colour LED ribbon strip four core flex for RGB LED ribbon strip and five core flex for RGB+W LED ribbon strip.
ALUMINIUM EXTRUSION WITH DIFUSER
A neat aluminium extrusion complete with frosted diffuser used with one of our many LED ribbons makes a bespoke light strip. The aluminium extrusion is available either as surface mounted or recessed (waterproof version available) and comes complete with end caps (one has a hole for the power cable) and fixing brackets for the surface mounted extrusion. Comes in 1m lengths – this extrusion can easily be cut to fit any application or multiple lengths can be used to make a longer linear length.
